Components of the assembly for plug&perf technology operations during hydraulic fracturing (HFR):

1. Plug Packer with Soluble Ball

large flow area provides reliable hydraulic connection after dissolution of the ball;
the soluble ball is installed in the packer plug in order to hydraulically isolate the hydraulic fracturing stages;
the ball material provides predictable dissolution dynamics under downhole fluid and pressure conditions.

2. Composite Packer Plug

provides hydraulic isolation of fracturing stages;
the composite material is easily drillable providing an equal bore diameter in the horizontal section of the string.

3. Soluble Packer Plug

provides hydraulic isolation of fracturing stages;
the packer plug completely dissolves in the well fluid, ensuring an equal diameter in the entire horizontal section of the string.

Running tool for the PK 3‑1/2″ and 3‑5/8″ bridge plug packer

It ensures the setting (installation) of the bridge plug packer in the casing upon targeted initiation of the propellant charge igniter.

Maximum Outer Diameter: 89/92 mm
Minimum Setting Force: 25 tons
Minimum Stroke Length: 250 mm
Low-Velocity Power Charge – Minimum Activation
Time: 6 sec
Igniter: PPT-230

Disposable Running Tool

It ensures the setting (installation) of the bridge plug packer in the casing string upon targeted initiation of the propellant charge igniter.

Used once. Does not require inspection/overhaul.
Reduced diameter and length. Does not “push” the bottomhole assembly (BHA) when setting the bridge plug packer. 
No gas venting into the wellbore.
 No Baker 10 adapter required.

Maximum outer diameter: 82 mm 
Overall dimensions in initial state: 899 mm 
Overall dimensions during packer setting: 699 mm
Minimum setting force: 20 tons 
Minimum stroke length: 200 mm 
Low-velocity power charge – minimum activation time: 6 sec
Igniter: PPT-230

Targeted Separation Device

It is used for the controlled separation of the bottomhole assembly (BHA) in case of retrieval issues. The separation command is sent from the ASI Operator Console. Contains no explosives (EX).

Maximum outer diameter: 76 mm 
Maximum length: 700 mm 
Maximum weight: 15 kg 
Maximum hydrostatic pressure: 80 MPa
Minimum application hydrostatic pressure: 1 MPa 
Maximum allowable temperature: 120°C 
Fishing neck diameter: 60 mm 
Overshot type: OV-82